From Raw Part to Approved Series Production

Machining Begins with the Drawing, Fixture, and Control Plan

The Novin Industrial Group machining unit—with twin-pallet vertical and horizontal CNC machines, a CNC lathe, and finishing equipment—is configured for repeatable series production. This capability supports Novin’s integrated part-production chain and is also available for standalone machining orders.

The raw part may be customer-supplied or sourced by Novin Industrial Group. Before series production begins, a machined sample is submitted for customer approval. Once approved, the program version and process information are retained in the online system.

Achievable tolerances are reviewed and confirmed for each project according to geometry, material, datums, fixture, production volume, and drawing requirements.
Machining Die-Cast Parts with a Dedicated Fixture at Novin Industrial Group
Series Machining and Controlled Part Flow
CNC Turning of Die-Cast Parts at Novin Industrial Group
CNC Turning of a Die-Cast Part
Shot Blasting and Surface Finishing of Die-Cast Parts at Novin Industrial Group
Shot Blasting and Surface Preparation
Capability Process

From Raw-Part Review to Controlled Series Production

Every project begins with a review of the drawing and raw part, then enters a repeatable production route after sample approval.

01

Review the Drawing and Raw Part

Review material, geometry, datums, tolerances, volume, and required characteristics.

02

Plan Operations and Design the Fixture

Define the operation sequence and design and manufacture a fixture suited to repeatable production.

03

Programming and Preparation

Create the toolpath in CATIA and prepare the surface by deburring or shot blasting when required.

04

Machine and Approve the Sample

Machine the sample, perform dimensional inspection, and submit the machined sample for customer approval.

05

Series Production and Process Control

Run the approved version with in-process checks and online production-data recording.

06

Final Approval and Packaging

Complete quality inspection, leak testing when required by the project, and part-specific packaging.

Sample or production inspection findings may lead to revisions in the toolpath, fixture, operation sequence, or control plan, with the new version retained in the system.
In-House Capabilities

Equipment and Operations for Series Machining

Primary Machining Equipment

Equipment configured for series production and reduced non-productive time.

  • One twin-pallet vertical CNC machine
  • One twin-pallet horizontal CNC machine
  • One CNC lathe
  • One 12-hour shift, with additional shifts available

Supporting Production Equipment

Dedicated equipment for completing features and preparing part surfaces.

  • Two automatic tapping machines
  • Three pillar drills
  • One shot-blasting machine
  • Project-specific equipment

Available Operations

Select the operation combination according to the drawing and the part’s functional requirements.

  • Milling and turning
  • Drilling, reaming, and boring
  • Tapping and creation of fastening features
  • Belt sanding and hand and pneumatic tools

Project-Specific Inspection and Testing

Inspect critical characteristics during production and before final release.

  • Calipers, micrometers, and height gauges
  • Go/no-go gauges and dial indicators
  • Dry or immersion leak testing when required
  • Inspection frequency according to each part’s control plan
Process Control and Data

Engineering and Digital Infrastructure Behind Series Production

Programming with CATIAIn-house toolpath design and CNC program preparation
Dedicated FixturesDesign and manufacture of standard and advanced fixtures in collaboration with Engineering and the Toolroom
Controlled Process VersionRetention of the operation plan, CNC version, tools, fixture, and inspection points for every part
Online Production MonitoringRecording output, nonconformities, downtime, and downtime causes by order and machine
Three-Level Equipment MaintenancePreventive, predictive, and major-overhaul planning in the online system
Part-Specific PackagingPackaging of approved parts according to a defined plan agreed with the customer

Do You Have a Series-Machining Project to Review?

We review the drawing, sample, material, volume, and inspection requirements to define the raw-part supply, fixture, machining, and control route.

Submit Project Information →